From the Amputee’s first steps, the SLK 3.0 immediately begins to learn his/her unique gait and program itself. Read more ↓ Artificial Intelligence continuously self-adjust its programming to always match Amputee progress.
Polycentric Design + Lightweight Build = Unmatched Amputee Energy Conservation:
Efficient Natural Polycentric Toe-Clearance in swing combined with an ultralight Aerospace Carbon construction conserves substantially more energy than any other MPK.Read more ↓ During mid swing, when the toes are closest to the ground, the polycentric design of the SLK 3.0 biomechanics brings the toes higher off the ground allowing the amputee to walk more confidently and without energy wasting gait abnormalities such as hip hiking or vaulting. After just a few days of wearing the SLK 3.0, the Amputee will be stunned to notice they don’t feel the usual end of day fatigue they were accustomed to with their old single-axis Microprocessor Knee.
Also Available in a KD Model. The Only MPK Designed Specifically for Needs of Knee Disarticulation Amputees – The SLK 3.0 KD – MPK
The Function of the Microprocessor:
200 times per second, sensors throughout the knee precisely measure minute changes in flexion/extension speed and acceleration/deceleration in any direction in space.Read more ↓ Instantly gathering data from its many sensor types enables the Microprocessor to accurately recreate natural biomechanical gait based on the unique walking pattern of the Amputee. Contrary to other MPKs, the SLK (Self-Learning Knee) will forever continue adjusting to the progression in the Amputee’s capability.
Primary benefits:
PDAC Verified for Microprocessor Controlled Swing & Stance
No Laptop, Training or Certification Required to Program
More Toe-Clearance in Swing vs. Single-Axis MPKs
All New Next Generation Microchip Delivers 200 Calculations Per Second
Randy’s own words: “It’s not an exaggeration to say that the SLK truly changed my life!”
After 11 years of using heavy MPKs, Randy lived with constant back pain and relied on daily pain medication and regular physical therapy to get by. He believed this chronic back pain was just part of wearing an MPK.
Then he tried the lightweight SLK 3.0. Since switching, his pain is completely gone and he has more energy than he’s had in years. Randy says it changed his life.
“I’ve been wearing microprocessor knees since I became an above knee amputee 11 years ago. I’ve worn MPKs from Ottobock, Ossur, and Blatchford. They all felt heavy, but I thought that was a normal part of wearing an MPK. The horrible pain that developed in my lower back was something I had gotten used to over the years. To manage the pain, I attended physical therapy 2-3 times per week. I was taking over-the-counter pain meds all day, every day. My physical therapist and I knew the pain originated from the heavy weight of my microprocessor knee but there was nothing we could do about that. Or so I thought!
I’ve been walking with the SLK for 6 months now. The SLK is so lightweight that the pain in my lower back is completely GONE! I haven’t needed to go back to physical therapy since I was fit with the SLK! I don’t even take pain medication anymore! It’s so much lighter and so much easier to walk with than every other microprocessor knee I’ve worn in the past. This knee has been a Godsend! Finally, a microprocessor knee that lets me be myself again!
Thanks to the SLK, I can spend all day on my feet in the woodshop, and I never get tired! I’ve never been more confident walking up and down hills. I can feel the SLK’s Artificial Intelligence adjusting to my movements if I start to walk up or down hills or change my walking speed. I didn’t realize how much extra work I was doing to walk with those other heavy MPKs in the past. My wife Linda can’t believe how much more energy I have now!
It’s not an exaggeration to say that the SLK truly changed my life! I can’t believe I’m living a pain free life now! People need to know about this knee! Thank you to the team at DAW!”
– Randy S., Trumansburg, New York
Thriving with the SLK 3.0 since October 2025
Paul’s own words: “I’m not tired at the end of the day ANYMORE!”
After years of struggling with several heavy or unresponsive MPKs, Paul finally found the one that feels natural and lightweight. Thanks to the SLK his posture is better and he now has the energy to stay active all day.
“Over the years, I’ve used several microprocessor knees. The Ossur Rheo* was way too heavy. The Ottobock C-leg* felt and responded like a brick. After experiencing the DAW SLK Microprocessor for a few months now, I couldn’t be happier!”
“The SLK feels so much lighter. It feels like I use half as much energy to walk compared to anything I’ve used in the past. My posture is better and I’m not tired at the end of the day anymore. The Polycentric Design allows me to walk with my legs closer together and it feels much more natural. I like to hunt and with the SLK, I feel more stable walking on uneven ground. I feel like I can finally be more active!”
– Paul P., Erie, Pennsylvania
Thriving with the SLK 3.0 since April 2025
*C-Leg is a trademark of Ottobock. *Rheo Knee® is a trademark of Össur.
A Matrix is a set of parameters based on your Patient’s weight, activity, and residual femur length.
The All New SLK 3.0™ comes pre-programmed with 5 different Matrices to accommodate patients of a different capabilities. Match your Patient to their Matrix using the chart below.
With your Patient’s Matrix selected, Self-Learning technology will do the rest of the programming for you, fine-tuning extension/flexion resistance in the swing and stance phases. Unlike any other MPK, the SLK™ 3.0 will continue to self-learn; continuously adjusting itself to your Patient as they progress.
You and your Patient may want to compare the function of different Matrices for preference. A Quick-Start Card™ arrives with the knee and provides instructions on how to input and change your Patient’s Matrix.
Short Description for L5856: Elec knee-shin swing/stance
Long Description for L5856: ADDITION TO LOWER EXTREMITY PROSTHESIS, ENDOSKELETAL KNEE-SHIN SYSTEM, MICROPROCESSOR CONTROL FEATURE, SWING AND STANCE PHASE, INCLUDES ELECTRONIC SENSOR(S), ANY TYPE
Short Description for L5613: Ak 4 bar link w/hydraul swig
Long Description for L5613: ADDITION TO LOWER EXTREMITY, ENDOSKELETAL SYSTEM, ABOVE KNEE-KNEE DISARTICULATION, 4 BAR LINKAGE, WITH HYDRAULIC SWING PHASE CONTROL
Short Description for L5845: Knee-shin sys stance flexion.
Long Description for L5845: ADDITION, ENDOSKELETAL, KNEE-SHIN SYSTEM, STANCE FLEXION FEATURE, ADJUSTABLE.
Short Description for L5848: Knee-shin sys hydraul stance.
Long Description for L5848: ADDITION TO ENDOSKELETAL KNEE-SHIN SYSTEM, FLUID STANCE EXTENSION, DAMPENING FEATURE, WITH OR WITHOUT ADJUSTABILITY
A Copy Of This Knee’s PDAC Verification Letter Can Be Provided Upon Request.
Tech Support
Speak to a DAW Technical Pro by Calling (800)252-2828